Bottom Case Rubber Feet for MacBook Pro Retina A1425 A1502 A1398 13" 15"


The adhesive on the Rubber Feet are not strong enough to stick the feet. Glue is required to properly install Rubber Feet as suggested by Apple.Apply a very small drop of glue on the bottom of the foot on the inner bottom case. Do not spread the glue.

Do not use your finger to press the foot plug down. Use the wooden end of a cotton swab to press the foot plug into place. Lightly press and hold the foot in place for 30 seconds.

Clean any excess glue with a cotton dry swab. Important: Do not wipe the glue; use the cotton dry swab to absorb any excess glue. Excess puddled glue may take hours to dry and may cause the bottom case to adhere to the logic board or interior cabling.