Blade 350 QX3 RTF/BNF Gimbal Control to Servo Adaptor

Works on all Blade 350 QX3 RTF and BNF models. Connects to your blade's existing gimbal control cable port and allows you to control a extra servo with your stock transmitter. No modification to the factory parts is required, simple plug and play. The Adaptor chip stores easily next to the battery for flight. Installs or removes in seconds.

A Video of the Adaptor working can be seen in the Customer Reviews section below.

To control the servo via the transmitter while flying: Cycle the top right switch on the transmitter from the Throttle Control to Gimbal Control. The left transmitter stick will now control the servo angle for 5 seconds before returning to normal throttle control. Return the top right transmitter switch to the Throttle Control position.

If you wish to control the servo angle prior to starting the motors, use the above procedure, but the left stick will control the servo until you change the top right switch back to Throttle Control.

Servo shown in photos is not included with sale. Adaptor works with servos with a operating Voltage of :3.0-7.2 Volts