BitScope Micro - USB Mixed Signal Oscilloscope, Waveform, Clock Generator, and Logic Analyzer

In the lab or in the field, working in hot or wet conditions, even attached to a flying quadcopter, it's the perfect diagnostic tool for hardware hackers, experimenters, students and engineers. BitScope Micro is no toy. It works with most BitScope software and it's fully user programmable. Program it in a variety of languages including C/C++, Python and Pascal or integrate it with third party software. You can even program it directly via the BitScope VM API; all you need is a spare USB port and if you want to use it remotely or share it among multiple clients, simply plug it into a Raspberry Pi or any Windows, Mac or linux system and fire up BitScope Server for a full IP addressable network connected test, measurement and data acquisition system. BitScope Micro is much more than just USB connected A/D & D/A convertors and set of GPIO signals. It's a fully featured mixed signal oscilloscope with analog range and offset controls, comparators, triggers and more. BitScope Micro's Diagnostic Port provides access to all the analog and digital inputs and waveform and clock outputs. Like all BitScopes this model can capture 8 logic/timing channels but in this case logic channels L6 and L7 are derived from the analog channel comparators. This is a very powerful feature because it means the voltage ranges and switching levels for those two channels can be adjusted to suit almost any logic family, even inverted ones! BitScope Micro is a real dual channel digital oscilloscope with fully compensated 1M„¦ / 20pF analog inputs. BitScope Micro Oscilloscope with BNC connections It's specifically designed to be able to be used with standard oscilloscope probes. All that's needed is a two pin header to BNC adapter which can be made for a few dollars using standard off-the-shelf components. In addition to the supplied mixed signal clips it means the oscilloscope probes designed for any BitScope can be used.