Bevel Gearbox Type Hug, Type B, i=1:1

General: Miniaturised right-angle drives for light duty.
Suitable for manual and short term drive applications.
Housing: Gear cases are injection moulded in filled nylon 6.6 for low moisture take up, low thermal expansion and high rigidity.
Two counter-bored clearance holes for conventional chassis mounting and a tapped insert below each shaft for vertical mounting.

Gearing: Straight cut gears, max. backlash 2°.
Ratio i = 1 : 1.
Shaft diamter 4mm.
Maximum speed 1000 rpm.
Gearbox and bearing lubricated for life.

Product No. 410 000 00, Version A:
Hardened steel gears bonded to ground and hardened steel shafts.
Sintered bronze bearing system.
Electrical insulation between shafts and housing.
Max. torque 0.68 Nm.
Weight: 0.041 kg.

Product No. 410 001 00, Version B:
Acetal gears moulded onto ground and hardened steel shafts.
Sintered bronze bearing system.
Electrical insulation between input/output shaft and between shafts and housing.
Max. torque 0.11 Nm.
Weight: 0.037 kg.