Bevel Gear Made of Brass Ms58 Module 0.5 50 Teeth i=1:1 Milled PN: 35023200
Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle =
90°. The bevel gears only run as a pair at the stated ratio.
| Transmission [i] | 1:1 (50/50) |
| Module | 0,5 |
| No. of Teeth | 50 |
| da [mm] | 25,7 |
| d [mm] | 25 |
| ND [mm] | 14 |
| NL [mm] | 5,0 |
| L1 [mm] | 8,5 |
| L [mm] | 9,5 |
| S [mm] | 7,5 |
| b [mm] | 3 |
| BH7 [mm] | 4 |
| E [mm] | 19,60 |
| Admissible MD [Ncm] | 18,0 |
| Weight [g] | 16 |
| Corresponding Counter Wheel [Article-No.] | 35023200 |
