BestTong 30PCS Raspberry Pi Heatsink Kit Copper Raspberry Pi Aluminum Heatsink for Cooling Cooler Raspberry Pi 3, Pi 2, Pi Model B+

Features:

-These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.

-These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.

-Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating.

-These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.

-These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc.

-Make sure the chip modules are free from dirt and grease.

-Peel the protective liner off on the base of the heatsink.

-Apply the heatsinks to the corresponding chip modules and apply firm pressure.

-4 pieces - 0.35inch x 0.35inch (8.9mm x 8.9mm) aluminum heat sinks

-2 pieces - 0.56inch x 0.56inch (14.2mm x 14.2mm) aluminum heat sink