Beadaholique 50 Epoxy Stickers - Fits Scrabble Tiles Or Pendants 18.5x20.4mm

Use these rectangular epoxy stickers to create a 3D look in your project! Great as an alternative to resin and glazes. NOTE: Keep out of direct sunlight for extended periods of time. Prolonged exposure to sunlight may cause the stickers to yellow. Measurements: 18.5x20.4mm, 2.3mm thick. Quantity: 50 Also available in quantities of 25, 100, and 200. How to make a Scrabble tile pendant using square epoxy stickers: Carefully peel the clear square epoxy sticker off of its protective backing, being careful not to touch the sticky side. Place the sticker directly on top of the image you are using. Press firmly with your fingers to remove any air-bubbles and to help secure the adhesive bond. Cut out the image with the sticker on top - carefully cutting along the edge of the sticker, making sure not to cut the sticker itself. Spread glue (a white glue such as Nunn permanent glue or Crafter's Pick works fine) on the backside of the cut out image/sticker. Center the image/sticker glue side down onto the non-letter side of the Scrabble tile (check the orientation of the letter on the back to make sure it's facing the right direction). Press into place and let dry. You can easily add a glue on bail such as an Aanraku bail to the back of the pendant once the front side is dry. It is recommended to use E6000 industrial strength adhesive to adhere the bail.