Baileigh HPB-78NC Horizontal Press Brake, 3-Phase 220V, 7.5hp Motor, 78 Ton Pressure

Baileigh a horizontal bending press is a machine that should be in every metal fabrication shop. The applications for this machine are limitless and the press is Baileigh Industrial's largest horizontal bending press in its line. The press uses a 220 volt 3 phase 7.5 hp motor to power the industrial grade hydraulic system; a system hat produces 78 tons of fabricating force. The press is the perfect for any shop that currently has a vertical press brake, but has smaller jobs to do. The advantage of a horizontal bending press is when a part is bent it's lying on its side on the perfectly machines bending plate, so it's completely square when completed. This advantage alone can save time and money compared to set up on a conventional brake press for smaller parts that have to be bent perpendicular to the beam. All Baileigh horizontal brake presses come with a numeric control that uses electronic encoders for accurate measurement. These controllers allow for manual bends or can be run in the program mode that stores up to 99 programs with up to 10 bends each. A manual back gauge is also included for repeatability. Specifications: return speed: 0.55-inches per seconds; Motor: 7.5 hp; pressure: 78 tons; punch height: 11.81-inches; working speed: 0.43-inches per seconds.; stroke accuracy: +/- 0.002-inches; stroke length: 13.78-inches; table height: 37.4-inches; approach speed: 1.69-inches per seconds; fixture holes: (1) at 4.646-inches diameter/(3) at 3.268-inches diameter and power: manual.