BIRUGEAR Bundle Premium HD Guard Film Clear LCD Screen Protector 3 Stylus for HP Split x2 13 13tg100 x2 PC 13

Protect your HP Split x2 from scratches with Screen Protector. Don't risk permanent damage to your screen when protection is just a click away. Our self-adhesive screen protector is specifically designed to prevent damage from happening while maintaining its full functionality.

Installation Guide:
1). Start by choosing a brightly lit, dust-free environment and clean the screen thoroughly with provided microfiber cleaning cloth.
~Tip: Although no tools are necessary for application, residue-free invisible tape works great to pick up excess debris. After wiping with cleaning cloth, take a piece of tape and gently lift any dust particles that remain on the screen.
2). Slowly peel away the film layer labeled "Step 1". Hold screen protector along the edges and avoid touching the film and screen surface.
3). Before placing screen protector, carefully align the cutouts and edges to your screen and slowly lower screen protector starting from the bottom and work your way up.
4). Gently sweep through the screen surface with the provided squeegee card. Push out any air bubbles towards the nearest edge.
~Tip: If you notice bubbling created by dust particles, you can use another piece of tape to gently lift the edges of the screen protector, one corner at a time, making sure not to bend excessively or crease the protector. Use a second piece of tape, carefully slide between the protector and your screen, and lift the remaining dust particles before laying the corner back down. Repeat step 4 as necessary.
5). Finally, remove the film layer labeled "Step 2" and you are done!

Please Note: The screen protector is only compatible with the g100 series of the HP Split x2, it is not compatible with other models