Aubig DC 12V Brushless Magnetic Drive Centrifugal Submersible Oil Water Pump 500L/H 5M/16ft

Specifications:
Model: DC40E-1250
Material: PA66+Glass fiber
Power consumption: 13.2W
Rated voltage: 12V
Rated current: 1.1A
Max flow rate: 8.3L/MIN (2.2G/MIN)
Max static head: 5M (16ft)
Diameter of inlet:outside-12.4mm /0.48",inside-0.88mm/0.35"
Diameter of outlet: outside-12.4mm/0.48",inside-0.64mm/0.25"
Noise: <35dB
Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60°C/140„‰
Item dimension: 81*65*48mm

Note:
1. Working at rated voltage (DC12V/1.1A ). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.

How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet);
3. Working environment (temperature and medium);
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.

Package includes:
1 * Water pump