Auber Instruments Digital EGT Thermometer/Pyrometer with Analog Output

This is a 1/32 DIN (24 x 48 x75mm) digital thermometer, pyrometer and process monitor. Compatible with 10 different temperature sensors and 9 types of voltage and current signals, it can be used in a broad range of temperature, pressure, and flow measurement applications. The meter offers 0.2% accuracy for temperature sensors. It also offers two points calibration (zero and range) for other transducers. The meter can record maximum and minimum value with corresponding timestamps. Its compact size makes it easy to fit in anywhere. This meter is great for automobile applications because it is can be powered directly by the car battery. Its bright LED display is easier to read from a distance than many dim LCD type digital thermometers. The peak holding function will hold the maximum temperature in the memory and allow the driver to review after the test run. The meter has a programmable alarm that can be set as high limit or low limit alarm. The alarm is displayed on the front panel with bright blue LED that is very noticeable. The alarm signal can also be sent out from the built-in relay. It can turn on a buzzer or a cooling device for EGT control. The LED brightness can be synchronized with headlight. When the headlight turns on in the night, the display will be dimmed by the illumination signal. It can also be dimmed directly from the key pad. This meter has an analog output option (also called retransmit function). It will output the display reading as a linear analog signal for data logger or data acquisition system. The output can be set to either 0-20 mA or 4-20 mA current. It can also be converted to voltage output with a provided 1% precision resistor.