Ardupilot Mega MinimOSD
MinimOSD, a minimal Arduino-based on-screen display board. It's tailored for use with ArduPilot Mega and the MAVlink protocol, and designed to be as compact as possible. It's main components are an ATmega328P 8 bit microcontroller with an Arduino bootloader, and a MAX7456 monochrome on-screen display. Programming is done through an FTDI-compatible 6-pin cable. It features two independent power and ground sections to isolate the OSD's analog stage: a +5V section for the ATmega and the OSD's digital stage, powered through the FTDI cable or other +5V source; and a regulated +5V section for the OSD's analog stage, powered through the video in/out header and capable of handling up to +12V input. Solder jumpers are available to combine the two power and ground sections if desired. Specifications: ATmega328P with Arduino bootloader MAX7456 monochrome on-screen display FTDI cable compatible pinout Standard 6-pin ISP header Two independent power sections with an LED indicator on each Solder jumpers for combining the power sections +5V 500mA regulator for up to +12V supply input Solder jumper for PAL video option Exposed test points for HSYNC and LOS Dimensions: 0.7""W x 1.7""L (2.4"" w/ pins as shown) x 0.3""H Setup Instructions »