AntMiner APW3-12-1600 PSU Requires 205v-264v Power 1600W Power Supply for Bitcoin Miners

REQUIRES 205-264 VOLTS TO WORK! The APW3-12-1600 Series AC-DC PSU is specifically designed with mining operations in mind, and combines high conversion efficiency and a strong dynamic performance into a power dense package. It also features short circuit, overload, overheat, low voltage and overload protections. The air flow direction runs from the AC input to the DC output, which is the same configuration as most miners. This proves beneficial for those with large-scale mining operations where heat management is a major consideration. The APW3-12-1600 can work stably in environments with a 50°C ambient temperature. If temperatures exceed 50°C, the PSU should be underclocked (refer to Max Load vs. Ambient Temperature Graph in the user guide for details). Considering the high temperature in mining operations, all internal components are selected with a standard of 105°C, so the APW3-12-1600 has a much longer lifespan than a general use PSU under similar high temperatures. The APW3-12-1600-B2 uses a PCI-E connector which is compatible with currently available ATX PSUs, as well as most bitcoin mining machines.One APW3-12-1600 is enough to power two AntMiner S5s at the same time. The high power efficiency translates to big cost savings -- if one uses a secondhand general use PSU running at 83% efficiency, when compared to the APW3-12-1600 running at 93.8% efficiency, assuming an electricity cost of $0.10 per kWh, a user could save more than $150 USD per year in power fees. Note: 1. The PSU cannot be used in countries with a mains power voltage lower than 205V. The PSU will not start below this voltage. 2. Be sure to keep the original box when you get PSU. The original box should be used to return the PSU if you request an RMA.