AdirPro-Self-Leveling-Cross-Line-and-5-Points-Dot-Laser-Level

The AdirPro ELP 106 laser is a cross line and a 5 point laser. This unit is self-leveling with an accuracy range of within 3°. The two, independent line beams and 5 dots are generated from 635nm laser diodes. The line beams have±3mm accuracy at up to 10m. As for the dots, up beam's accuracy is ±5mm/10m, the down beam's is ±1.5mm/10m, and the left right and front are ±4mm/3m.

Design
The ELP 106 laser has a user friendly operation. The laser lines and dots are highly visible, class 2 beams. The unit has 5 beam display options: horizontal, vertical, horizontal+vertical, dot display, and horizontal+vertical+dot display. It also has a pulse mode if that serves you better than a constant beam. The beams are stable and leveled with a magnetic pendulum system.
The casing is made of plastic and is trimmed with a thick rubber casing to protect the laser against standard jostling that occur during transportation and on a jobsite.

Leveling
The ELP106 is a self-leveling unit. Additionally, there is a locking system to ensure that the compensator does not shift during transportation due to vibrations. All you need to do is shift the switch from on to X to lock it.
The beams should display constantly (unless in pulse mode). If the beams blink it is indicating that the unit is out of compensation range.

Mounting Options
The ELP-106 Cross Line Dot Laser has two mounting nuts, one at 5/8" and the other at 1/4". This allows you to mount it either to a bracket or a tripod, no matter what the threading is. The unit comes with an L-shaped multifunction mount that can be secured either with the heavy duty magnets embedded in the bracket or by screw.
NOTE: The down beam laser dot is located in the center of the 5/8 thread.