Addressable LED Strip WS2812B, 5 meters, 30 LEDs/meter, White PCB

Individually addressable LED strip based on the WS2812B integrated RGB LED and driver from WorldSemi. The strip is powered by a 5V power supply (not included) and is controlled by a single data line from a suitable controller (not included), for example Teensy 3, Arduino, Raspberry Pi, BeagleBone Black or similar microcontroller/computer. 3-pin JST connector included: Red:VCC, Blue:GND, Green:DATA. The strip has 3M adhesive tape on the back. Installation surface must be smooth, clean and dry. Strip can be cut between every LED to create custom lengths. Do not bend strip sharply. Do not exceed 5 meters in a single circuit. Longer runs should be powered from both ends to reduce voltage drop.