Acrylic Case Box For 1GB Ram Banana Pi

Details:
Brand new and high quality
This professional acrylic Banana Pi Case can protect you Banana Pi perfectly from rogue wires that might short it out while still allowing full access to the board
Provides slots to access the ,USB ports,SD card,composite video, audio, and other peripheral connectors as well as vents to ensure the board gets proper cooling.
Simply to install,ultra lightweight
Box only,the Banana Pi not included
Material:Acrylic
Color:Transparent
Size:10.4 x 7.3 x 3.4cm
Package:1 x Banana Pi Case

Assembly Method:
1.Push four small screws up the round corner holes of the bottom panel,and attach four short male/female brass standoffs
2.Place the Banana Pi on the top of the mounting bolts
3.Screw the four long female/female brass standoffs onto the male ends of the female/male standoffs showing through the motherboard, securing the motherboard to the bottom acrylic piece
4.Push the two longer acrylic front and back pieces onto the bottom piece, placing the tabs into the bottom piece and maneuver the pieces so they are vertical and fitting around the components
5.Push the two shorter end pieces onto the bottom piece, ¡°folding¡± the end pieces up until they are vertical and fitting over both the components and the tabs of the front and back pieces
6.Place the top on the Banana Pi case,Screw the four remaining short screws into the female/female brass standoffs