ATian SGC-698 Photography Interview MIC Microphone for Nikon Canon Camera DV Camcorder Canon 1DX 1D MARKIV 5DII 5D3 7D 70D 550D 6D 60D 600D 5D 650D, 100D Nikon D300S / D4 / D35 / D5100 / D5200 / D53

Description: Use standard XY stereo miking techniques, pan position clear, stable Built-in + 10dB and -10dB sensitivity switch, suitable for different recordings sound intensity Built-in low-cut filter switch, effectively reducing the environmental noise glitch Use anti-radio frequency interference (RFI) shielding technology, can reduce a good cell phone signal interference A low power remind function, allowing users to replace the battery fully prepared to do Built-in shock-absorbing structure, effectively reducing the mechanical vibration noise Use a standard shoe connector, simple installation, solid 3.5mm stereo mini-plug output signal ? Standard Surface anodized aluminum alloy, beauty, fashion, anti-scratch Suitable for: Canon :1DX 1D MARKIV 5DII 5D3 7D 70D 550D 6D 60D 600D,100D,etc. Nikon :D300S/D4/D35/D5200/D5300/D800/D3200/D3300/D610/D750/D7000/D7100/D810 Sony:A99 A77II A7 A7S A58 RX10 Pentax:K-5,Olympus E-5 Panasionic Adams Bar GH3 GH4. Package Contents: SGC-698 ¡Á 1 Windscreen ¡Á 1 Flannel bag ¡Á 1 Manual ¡Á 1 Note:The CR2032 3V button battery do not include. Troubleshooting: 1.Unable to use it on Nikon D5000 camera. Answer:Nikon D5000 is not compatible to this mic,because Nikon D5000 do not have the 3.5mm mini stereo connector 2.power light not turning on when switched on. Microphone randomly works and not working Answer:The power light will turn on when swithch on it,this indicate that the item is starting to work,then it will off,when working properly.If the LED light turn on with red,or flash,then it means it is low battery,and need to replace the battery,or it will stop to work after 1 or 2 hours. 3.No battery was in box. Answer:This item do not inclue the battery. 4.The mic produces a hiss and pop at idle. The Shure mic does not. Answer:Maybe the problems of the connector do not connect well,or there is the dust in the mic hole,customers can try with another camera to see if it has this problem,if not,then it is the dust to effect the noise.