ASP-Q1 - Zapco 6-Channel Analog Signal Processor
Five bands of Parametric Equalization: Since no two cars are the same, there is no way for us to know exactly where the center points need to be in any particular car. The ASP-Q1 lets you vary the center point of each of your 5 EQ bands to put the correction exactly where you need it to custom tune your system to your car. Variable 18dB/octave electronic crossover: There are 4 crossover filters on the ASP-Q1. You can only 3 filters to configure a 2-way system with a sub woofer and front and rear speakers with high pass or full range and fade front to back from the EQ. You can also use all 4 filters and confiigure an active 3-way system with a woofer, a band passed midrange, and a high pass for tweeter. Separate Bass Control: Bass output is controlled separately. The bass lever lets you balance the bass to the highes. As well as the crossover filter for the bass there is a bass phase control to adjust the phase of the bass signal from 0 to 180 degrees to help align the bass wave to the rest of the system. Auxiliary input: The ASP-Q1 has an auxiliary input so you can play from another in-car source ro from a portable player. Input gain controls: Each channel of both main and Auxiliary input has its own input signal adjustment. Balanced/Unbalanced Inputs: The ASP-Q1 can accept either balanced inputs, with a Bal/UnBal switch for Main-in and Aux-in. Tiffany style panel mount RCA connectors: These give positive, trouble free RCA signal connection High voltage power supply: The ASP-Q1 has a remote high voltage power supply for or a true 9.5 Volt RMS preamp output. THD < 0.001%THD Signal to Noise Ratio > 110dB Stereo Separation 92dB Headroom 20dB Preamp Output 9.5V RMS / 14V Peak Dimensions (mm): 121(W, w/RCA) x 25.5(H) x 176(L)