AMT 4901-95 1.5" x 1.25" High Head Straight Centrifugal Pump Cast Iron, Buna-N Seal, 3hp 3 Ph ODP

AMT 4901-95 Head Straight Centrifugal Pump Cast Iron, Buna-N Mechanical Seal, Shaft Seal in Stainless Steel. 1 1/2" Inlet, 1 1/4" Outlet. 3 HP ODP (Open Drip Proof), 3 Phase, 208-230/460 VAC/60 Hz, 9/5 Full Load Amps, 56J Frame Motor. AMT High Head End Suction Centrifugal Pump are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling, sprinkler/fire protection systems and pressure boosting. These heavy duty high pressure Pump are available in a variety of construction and seal materials to meet your specification. Pull-from-rear design for easy servicing without disturbing any piping. High efficiency closed impeller maximizes performance. Pump are not self-priming and require flooded suction. Cast Iron Construction; Buna-N Mechanical Seal and O-ring, Depending on Model; Optional Silicon Carbide Mechanical Seals Available; Stainless Steel Motor Shaft and Hardware; 3450 RPM Motors; NEMA Base Mounted Motor; High Efficiency Closed Stainless Steel Impeller; Discharge Rotates in 90 Increments; Maximum Working Pressure 150 PSI; Maximum Temperature 180 F; (4) Front Drain Plugs, Located 90 Apart; NOTE: Dimensions are in inches and have a tolerance of +/- 1/4". NOTE: Electric supply for ALL motors must be within +/-10% of nameplate voltage rating (e.g. 230V +/-10%= 207 to 253).