AGPtEK Anti-corrosion IP68 Waterproof 1/2" NPT 12V 9W Underwater Boat Drain Plug Light for Fishing Swimming Diving - Blue

Specification:
1. Single LED 1.5W with 6 LED insides ,total 9W super brightness
2. Bronze housing materials, 100% anti-corrosion
3. Standard "1/2 NPT thread type, connected with 2 meters cable
4. Connected with waterproof connector in order to easy installation, no drilling hole are needed, just screw it into the holes on your boat
5. Waterproof : IP68
6. Color: Blue
7. Connect to 12-24V battery or power sources only
8. Current working：570MA， Luminous Flux 70 Lm

Installation instruction:
1. Loosen the drain light
2. Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting.The garboard fitting is 1/2 NPT
3. Connecting the light wire to a 12-24V on/off switch. Plug in the waterproof connector
4. Attach the red lead the positive(+) with the included in line 3 AMP assembly fuse and the black lead to the negative (-)
5. Switch on the light to check if it works well

Packing include:
1* Drain Plug light
1* Protective tube

Remark: Lights are for underwater use only; do not operate it out of water

AGPtek is a registered trademark protected by the US Trademark Law. AGPtek products are sold by authorized sellers only.