900mW 16X 405nm BDR-209 Blu-Ray Copper LD Module W/Boost Driver & 405-G-2 Lens

Listing is for a single 900mW 16X 405nm BDR-209 Blueray Module W/Microboost driver & 405-G-2 Lens. Perfect for running off a single rechargeable 3.7V Li-Ion or a 5V 2A wall adapter. Unit is ready to be dropped into your final project. Just throw in a heatsink and apply power source. The copper module upgrade provides a huge improvement in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode. Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering. The driver is contained in the module. You can discard the back half if you need the extra room just be careful not to let the driver short on anything.:) This is the most powerful 405 diode available. Wire assignment: Red + Black - Specs Wavelength 405nm +/- 5nm Input Voltage 3.2V-5.5V Driver Output Current 500mA(default can change by request) Driver Current Draw 1100mA +/- 0.5A Power Output 850mW-950mW Driver Type Constant Current Lens 405-G-2 Glass Lens Reverse Polarity Protection Yes Duty Cycle Continuous with proper heatsinking