828P PoE Gigabit Ethernet Extender Kit 2 Port Over 4 Pair Wiring

Direct from the Manufacturer factory. The Enable-IT 828P Gigabit PoE Ethernet Extender Unit is the worlds First copper Gigabit solution in the industry today. It can be used with your existing PoE Midspan switch, or PoE Injector. This kit comes with the Enable-IT 360 Gigabit PoE+ (56V-61W) Injector. The 828P can drive your Gigabit Ethernet and your PoE up to 240m or 800ft or when used with the standalone 828 Units up to 660m / 2,000ft. This cost effective unit blows away any previous solution including fiber for very quick plug and go installation of PoE IP cameras, PoE Access Points and remote LAN segments. The Enable-IT 828P drives industry standard 1000baseT Ethernet signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple 828 units and uses PoE+ Power. This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today. The 828 Series Solution is a standalone PoE+ powered Gigabit Ethernet Repeater that extends the range of your Gigabit Ethernet to an unpowered remote location. This is ideal for installing high powered PoE+ cameras remotely using only a CAT5e or CAT6 rated 100m cabling. Selectable DIP switch for disabling PoE output to enable standard non PoE LAN devices. You can also daisy chain (4) 828 units to reach 660m / 2,000ft to power a 36v PoE device easily. Made in the USA with Quality and Pride. * Enable-IT 828P - Pricing is for a complete solution. Includes the following: (1) Enable-IT 828 Gigabit PoE Ethernet Extender Unit (1) Enable-IT 360 61W-56V PoE+ Injector (1) Enable-IT 828 Gigabit PoE Ethernet Extender User Manual