650mW 16X 405nm BDR-209 Blu-Ray Copper LD Module W/Boost Driver & Three Element Glass Lens
Listing is for a single 650mW 16X 405nm BDR-209 Blu-Ray diode in Copper Module W/Boost Driver & Three Element Glass Lens. Perfect for running off a single rechargeable 3.7V Li-Ion or a 5V 2A wall adapter. Unit is ready to be dropped into your final project. Just throw in a heatsink and apply power source. The copper module upgrade provides a huge improvement in thermal conductivity over the standard brass module for moving the heat away from the diode to your heatsink which gives a much more stable output from the diode. Modules are wired with extremely flexible 26AWG wire that is burn proof and makes for very easy soldering. The driver is contained in the module. You can discard the back half if you need the extra room just be careful not to let the driver short on anything.:) This is the most powerful 405 diode available Wire assignment: Red + Black - Specs Wavelength 405nm +/- 5nm Input Voltage 3.2V-5.5V Driver Output Current 600mA(default can change by request) Driver Current Draw 1100mA +/- 0.5A Power Output 650mW-750mW Driver Type Constant Current Lens Three Element Glass Lens Reverse Polarity Protection Yes Duty Cycle Continuous with proper heatsinking