The 440C stainless steel sphere has a mirror-like finish, is Grade 100, and has a precision tolerance. The 440C stainless steel grade is wear resistant, offers mild corrosion resistance, and can be heat treated to very high hardness. It can attain higher hardness than 440A and 440B when in the hardened condition. A martensitic stainless steel, 440C is magnetic. The mirror-like finish provides a bright, reflective appearance.

Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Martensitic grades can be heat treated. The precipitation-hardening (PH) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel.

Tensile strength, used to indicate the material€s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Magnetism characterizes how much the material is repelled by or attracted to a magnet.