4130 Alloy Steel Sheet, Unpolished (Mill) Finish, Annealed, AMS 6350, 0.04
Type
Price
Date
Current Price
$68.38
2023-12-20
Highest Price
$68.38
2023-12-20
Lowest Price
$68.38
2023-12-20

4130 Alloy Steel Sheet, Unpolished (Mill) Finish, Annealed, AMS 6350, 0.04" Thickness, 12" Width, 24" Length, OnlineMetals

The 4130 alloy steel sheet has been annealed, has an unpolished (mill) surface, meets SAE Aerospace Material Specifications AMS 6350 standards, and has a standard tolerance. The 4130 alloy steel grade contains chromium and molybdenum for strength and hardenability, with lower carbon content than 4140 alloy steel to provide better weldability. This material can be heat treated for higher hardness. The sheet has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped.

Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a cutting edge. Some tool steels are designed to resist deformation when used in elevated temperatures.

Tensile strength, used to indicate a material’s overall strength, is the peak stress it can withstand before it breaks. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.

  • Title4130 Alloy Steel Sheet, Unpolished (Mill) Finish, Annealed, AMS 6350, 0.04" Thickness, 12" Width, 24" Length, OnlineMetals
  • BrandOnlineMetals
  • ManufacturerSmall Parts
  • BindingMisc.
  • ProductGroupBISS
  • ItemPartNumber9661
  • Model71215
  • Size0.04" Thk
  • UnitCount1