4000 Watt - Metal Halide - 440 000 Lumen - Hazardous Location - Light Tower - 36 Feet

4000 Watt - Metal Halide - 440,000 Lumen - Hazardous Location - Light Tower - 36 Feet(-277V). Made in the USA The EPL-LM-36-4-MH 4000 Watt Hazardous Location Light Tower from Larson Electronics is a 36 foot extendable light tower equipped with four Class 1 Division 2 metal halide light fixtures producing 110,000 lumens each. The four 1,000 watt metal halide lamps produce a combined 440,000 lumens of light, allowing this unit to effectively cover large work areas with high quality illumination. The EPL-LM-36-4-MH telescoping steel light tower is designed to allow operators to quickly and safely deploy 4 Class 1 Division 2 approved metal halide light fixtures in locations where this equipment must be elevated to heights of up to 36 feet for effective application. This two section light boom can be extended to 36 feet for maximum area coverage and collapsed to 16 feet when not in use. The tower is constructed of square steel tubing with a lower section 20 feet in length and 4 inches in diameter and an upper section 16 feet in length and 3 inches in diameter. The mast is elevated using an included 1,000 lbs hand winch with 1/4 inch cable and is extended to its full height using a second 1,000 lbs winch. Included with this light tower are four of our HALPRM-1000WMH metal halide fixtures producing a combined total of 440,000 lumens of light output at 4,000 watts. Class 1 Division 2 groups A, B, C and D approved, these metal halide fixtures are also UL1598 approved for outdoor marine use and IP65 rated. The Class 1 Div 2 rating, high power and durability of these fixtures makes them ideal for use in common commercial applications as well as hazardous locations where flammable petrochemical vapors may occassionally be present.