4 Axis Nema 23 Stepper Motor + Stepper Motor Diver 3A 24-50VDC Peak +350W Power Supply36VDC/9.7A with 1 Breakout Board and Parallel Cable for Professional 3D Printer

Nema 23 Stepper Motor:

Frame Size: Nema 23

Phase: 2 Phase

Step Angle: 1.8 Degree

Current: 3.0 A

Rated Voltage: 4.8 V

Resistance: 1.6Ohm/Phase

Inductance: 6.8 mH/Phase

Holding Torque: 425oz-in (2.8N.m)

Dentent Torque: 24.5N.cm

Rotor Inertia: 800g.cm2

Number of Wire Leads: 4 (Black A+, Green A-,Red B+, Blue B-)

Weight: 10.45kg

Length: 112 mm

 

Stepper Motor Driver:

Average Current Control, 2-Phase Sinusoidal Output Current Drive

Supply Voltage from 24VDC to 20VDC

Opto-isolated Signal I/O

15 Channels Subdivision and Automatic Idle-Current Reduction

8 Channels Output Phase Current Setting

 

Power Supply:

350W-36V

Breakout Board and One Pc Parallal Cable

Built in DB25 Male Connector

 DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17DB25 Input Pin: P10,P11,P12,P13,P15.DB25 GND Pin: P18-P25Power supply: +5V DC

Built in C-class Optical-coupler

High quality with Surface-mount Tech