4 Axis 1.2N Stepper Motor 3.5A Driver TB6560 Nema23 Parallel interface Board CNC Kit

1.CNC USB Interface Breakout Board
Electrical performance:
Input Power:5V DC power supply or computer USB to take power
Work axis stepper:Received the highest 5-axis independent driving
Drive:Pulse + direction + enable signal
Weight:About 200G

2.Stepper Motor Driver
Electrical parameters:
Input voltage DC 12 ~ 36V input
The input current of 1 to 4 amps, select the drive a stepper motor.
Output current of 0.5A ~ 3.5A
Temperature Operating Temperature -10 to 45 ℃; Storage temperature -40 ℃ to 70 ℃
Humidity not condensing, not drops
Gas prohibit combustible gas and conductive dust
Weight: 200g
1. the definition of control signals:
PUL +: step pulse signal is input side or the positive pulse signal input positive terminal
PUL-: the negative input of the negative input pulse signal or a positive pulse signal
DIR +: stepping direction signal input to the positive terminal or negative pulse signal input to the positive terminal
DIR -: stepping direction signal input of the negative side or reverse step pulse signal input negative terminal
3.250W 24V 10A switching power supply
4.57BYGH56-401A Stepper Motor(1.2N.m 2.8A）
Step Angle Accuracy: +-5%(full step, no load)
Resistance Accuracy: +-10%- Inductance Accuracy: +-20%
Temperature Rise: 80 Degrees Celsius CMax.(ratod current,2 phase on)- Ambient Temperature: -10°C-+50°C
Insulation Class: B
Dielectric Strength: 500V AC for one minute
Shaft Radial Play: 0.06Max.(450g-load)
Shaft Axial Play: 0.08Max.(450 9-load)
What is in box ?
1 x Parallel interface CNC breakout board
4 x TB6560 3.5A stepper motor driver
4 x Stepper Motor 57BYGH56-401A
1 x 250W 24V 10A power supply