4 [Authorized US Dealer] Updated 32 Bit CAME-7800 3 Axis Camera Gimbal+ Case And Stand

The CAME-7800 3-Axis Camera Gimbal from CAME-TV is a handheld stabilizer designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7. It utilizes three motors that stabilize the camera along the pan, tilt, and roll axes. This compensates for shakes, vibrations, and other unwanted movements, allowing you to capture smooth, free-floating shots. The stabilizer features two side handles for handheld use and a top handle for low-angle shots or simply transporting the assembled stabilizer on set. For increased creative possibilities, the CAME-7800 offers multiple operation modes. You can choose to lock the camera in place along all three axes, or have the camera smoothly follow your pan and tilt motions while keeping the horizon level. There is also a Commixture Mode, which locks the tilt axis while allowing the camera to follow left and right panning movements. Modes can be easily switched using a joystick, which can also be used to adjust camera pan and tilt position. The CAME-7800 features a clean design that hides all off the wires. As with sled-style stabilizers, your camera needs to be properly balanced in order to get the best performance. Key Features 3-axis motorized gimbals Supports loads up to 6.5 lbs Pre-calibrated 32-bit Alexmos control board Lock, Follow, and Commixture Modes Joystick for pan, tilt, and mode control Side handles Top handle Quick-release plate Monitor bracket Battery and charger Balance stand and case included