36V 350W brushless motor controller for Electric bike bicycle & scooter

Specifications:

This 36 volt controller has 13 connectors
Rated Voltage 36V / 48 Volts
Rated Motor 250Watts (36V) / 350 Watts (48V)
Rated Current 16±1A
Conversion Efficency 95%
Under Voltage Protection 31.5-42V (±0.5V)
Operation Notice:

Connect power, motor, and throttle, but not connect the Hall lines.
Switch on the power lock, roll the throttle. If the motor works well, connect the Hall lines
If the motor rolling reversely, change any two of the motor phase wires and check the motor again, before connecting the Hall wire.
Diagram

1. Blue/Black - cruise/earthing
2. White wire - self-learning (plug two white wire together)
3. White/Black - Brake(low)/brake(low)
4. Purple - Brake(high)
5. Red/Black/Green - throttle positive/throttle negative/throttle signal
6. Red/Black/thin Yellow/thin blue/thin green - +5V/Earthing/Motor Hall lines
7. Thin Blue - tachometer
8. Red/Blue/Black - +5V/Signal/Earthing (Pedal Assistant)
9. Thick Blue/thick Yellow/Thick Green - Motor phase lines
10. Thick Red/thick Black/thin red - power positive/power negative/ignition switch