35mm Hubcentric 5x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) Compatible with Nissan Infiniti G35 G37 Q50 Q60 Q70 FX35 FX50 350z 370z Altima Maxima 300zx Sentra - Silver 66.2mm 2pcs

Item Specifications:
Thickness: 35mm
Bolt Pattern: 5x114.3 or 5x4.5
Centerbore: 66.1mm
Stud/Nut Thread Pitch: 12x1.25
Material: T6 Aerospace Grade Aluminum

Compatible With:
NISSAN
1995-1998 240sx (Will NOT fit Base Models)
1987-1996 300zx
2003-2009 350z (Requires removal of Wheel Guide Bolt on Front Rotor for proper installation)
2009-2019 370z (Requires removal of Wheel Guide Bolt on Front Rotor for proper installation)
2002-2019 Altima
1989-2018 Maxima
2003-2019 Murano
2008-2019 Rogue
2007-2012 Sentra (SE-R & SE-R Spec V ONLY)
2012-2019 Sentra

INFINITI
2003-2014 FX35
2003-2009 FX45
2009-2014 FX50
2003-2009 G35
2008-2014 G37
1996-2005 I30
2002-2005 I35
1992-1997 J30
2003-2011 M45
1990-2008 Q45
2014-2019 Q50
2014-2019 Q60
2014-2019 Q70
2014-2019 QX60
2014-2018 QX70

IMPORTANT - Must check before purchasing
- SAFETY / INSTALL WARNING: Do NOT install wheel spacer if your wheel studs or lug nuts make contact with the back of your wheels.
- Wheel Stud Length: Your vehicle's wheel studs need to be less than 35mm. If not, the back of your wheels need pockets long/wide enough for your studs.
- Fender Gap: Measure your wheel gap for clearance. You will need at least 35mm of fender clearance to prevent the wheel/tire from hitting the fenderliner.
- Fitment: Use the Applications list above. If your vehicle is not on the list, message us so we can help find the correct item.
- No Returns or Exchanges once installed.

Contact Us
Our experienced and knowledgeable staff are here to help with any questions or problems you may have. Simply copy and paste the following link to your browser:
https://www.amazon.com/ss/help/contact/?_encoding=UTF8&ref_=v_sp_contact_seller&sellerID=A23ID4AZTDBV78