35 ROUTER BIT SET - 1/4" inch CARBIDE BITS KIT Shank ALUMINUM CASE SAE - New

35 ROUTER BIT SET - 1/4" inch CARBIDE BITS KIT Shank ALUMINUM CASE SAE - New

This comprehensive set of Tungsten Carbide tipped bits should fulfill just about all needs.

These router bits can be re-sharpened as necessary.

Manufactured using sealed bearings, contained within a custom made aluminum carrying case with handle and twin clasp closures.

Case dimensions: 12.75 x 9 x 2.75"

Router bits are in SAE measurements:
- Core Box R1/8, R1/4"
- 90* V Grooving 1/2"
- Round Nose R1/4"
- Mortising 1/2"
- Dovetail 1/2, 1/4"
- Straight 1/8, 1/4, 3/98, 1/2, 3/4"
- Panel Pilot 1/4"
- Flush Trim 3/8x1/2", 3/8x1". 1/2x1/2", 1/2x1?, 3/4x1"
- 45* Chamfer 1/2"
- Cove R1/4, 3/8"
- Rabbeting 1/4, 5/16, 3/8"
- Classical Cove R5/16"
- Mave Edge R3/16"
- Beading R1/2"
- Double Roman R3/16", R1/4"
- Roman Ogee R5/32, 1/4,"
- Rounder Over R1/4, 3/8, 1/2"

Their equivalents in metric are:
- Straight x 3.2mm/6.35mm/12.7mm/25.4mm/9.5mm/19mm
- 90 V groove R3.2mm;
- Core box 6.35mm;
- Flush trim 9.5mm 12.7mm 19mm 45
- Chamfer 30mm
- Roman ogee R4mm R6.35mm Cove 6.35mm R9.5mm
- Wave edge R4.76mm
- Dove tail 12.7mm 14.3mm
- Mortising 12.7mm
- Pound nose R6.35mm 90
- V groove 12.7mm
- Panel pilot 6.35mm
- Corner round R6.35mm R9.5mm R12.7mm
- Slot cutter 6.35mm 7.9mm 9.5mm
- Beading R12.7mm
- Classical core R7.9mm
- Classical R4.76mm 6.35mm