3 Axis CNC Router Kit 3.0Nm Nema 23 Stepper Motor & Driver 400W 36V Switching Power Supply CNC Mill Router Lathe Robot Engraving Machine

Driver Specification

*Input voltage 20-50VDC
*Anti-Resonance provides optimal torque and nulls mid-range instability
*Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
*Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
*15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
*Soft-start with no "jump" when powered on
*8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
*Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
*Automatic idle-current reduction
*Suitable for 2-phase and 4-phase motors
*Support PUL/DIR mode
*Over-voltage and over-current protections

Motor Specification

*Manufacturer Part Number: 23HS45-3504S
*Motor Type: Bipolar Stepper
*Step Angle: 1.8 deg
*Holding Torque: 3Nm(425oz.in)
*Rated Current/phase: 3.5A
*Voltage: 4.2V
*Phase Resistance: 1.2ohms
*Inductance: 5mH ± 20%(1KHz)
*Frame Size: 57 x 57mm
*Body Length: 113mm
*Shaft Diameter: Φ10mm
*Shaft Length: 24mm
*D-cut Length: 20mm
*Number of Leads: 4
*Lead Length: 400mm
*Weight: 1.6kg

Connection

Black(A+), Green(A-), Red(B+), Blue(B-)

Power Specification

*36V DC 11A output
*AC input voltage range: 93~132V/176~264VAC
*115V/230V AC selected by switch
*High efficiency low cost
*Forced air cooling by built-in DC fan
*Low output ripple and yawp
*Over current, over voltage, short circuit and overheat protections
*215*115*50mm (L*W*H)