27W 1800 Lumens Aluminum Alloy IP68 Waterproof Rate 9 LED Boat Drain Plug Light, 2 Colors

Specification:

1.Titanic Aluminum Alloy housing materials 100% anti-corrosion
2.Easily replace the existing 1/2" drain plug on the boat, no need to drill hole on boat;
3.Simply screw into the 1/2" threaded entry and connect wires to a switch;
4.Quick Disconnect and remove with plug in& out waterproof connector, connected with 2 meters cable
5.Connected with waterproof connector in order to easy installation, no drilling hole are needed, just screw it into the holes on your boat
6.Install for both small or large boat with DC8-28V built-in driver

Installation instruction:

1.Loosen the drain light
2.Run the cable leads thru the garboard drain opening and screw the drain plug light assembly into the existing garboard fitting .The garboard fitting is 1/2 NPT
3.Connecting the light wire to an 8-28V on/off switch. Plug in the waterproof connector
4.Attach the red lead the positive(+) with the included in line 3 AMP assembly fuse and the black lead to the negative (-)
5.Switch on the light to check if it works well
6.Wire Connection Diagram

Packing includes:

1* Drain Plug light
1* Protective tube

Remark: Lights are for underwater use only; do not operate it out of water