2.4Ghz Built in DMX512 Wireless PCB board Controller/Receiver for stage light

Description:
DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by console) by wireless way.No time delay when signal data is transmitting, signal data is real time and reliably.This product adopts a 2.4G ISM frequency section.High effective GFSK modulate,communication design; 126 channels jumping frequency automatically, high anti-jamming ability.

Operating manual:
(A) ID code and LED color corresponding relationship:
1:RED
2:GREEN
3:RED+GREEN
4:BLUE
5:RED +BLUE
6:GREEN+BLUE
7:RED+GREEN +BLUE

(B) Press key 1 time to indicate ID setting, Press again to set IC,
then ID value adding 1 each time you press the switch.

(C) Working condition:
LED constant lit up:No DMX or wireless signal.
Red LED flash:Transmitting.
Green LED flash:receiving

(D) RF frequency 2.400 - 2.525G
total 126 channels,it's searching automatically,

(E) ID Code "1-7" groups ID code,press ' KEY' for setting,
it only can work under same ID code of transmitter and receiver. (Same LED Color)
Easy PCB Board Interface Definition 4PIN : +5V 、 DMX+ 、 DMX- 、GND .

What's in box:
1 x Wireless DMX PCB Board
1 x Antenna
1 x Wired Indicator