20mm (0.75 inch) Hubcentric 5x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) Compatible with Nissan Infiniti G35 G37 Q50 Q60 Q70 FX35 FX50 350z 370z Altima Maxima 300zx Sentra - Black 66.2mm 2pcs

WARNING: The included lug nuts extend past the face of the spacers. IT IS REQUIRED that the back of your wheels have small cavities (at least 2" width and 1/4" deep) in the mounting pad for installation of these spacers. These cavities are NEEDED so that the lug nuts and wheel studs can sit in this pocket. Verify this before purchasing. Message us for any questions before purchasing the item.

Applications:
1995-1998 Nissan 240SX (Will NOT fit Base Models)
1987-1996 Nissan 300ZX
2003-2008 Nissan 350Z
2009-2017 Nissan 370Z
2002-2017 Nissan Altima
1995-2017 Nissan Maxima
2003-2016 Nissan Murano
2008-2016 Nissan Rogue
2000-2011 Nissan Sentra (SE-R & SE-R Spec V ONLY)
2012-2017 Nissan Sentra

2003-2012 Infiniti FX35
2003-2008 Infiniti FX45
2009-2013 Infiniti FX50
2003-2008 Infiniti G35
2008-2013 Infiniti G37
1996-2001 Infiniti I30
2002-2004 Infiniti I35
1993-1997 Infiniti J30
1990-1992 Infiniti M30
2003-2010 Infiniti M45
1990-2006 Infiniti Q45

*** Important Notes*** Check Before Purchasing:
1. Fender Gap: Measure your wheel gap for clearance. You will need at least 3/4" (20mm) of fender clearance to prevent the wheel/tire from hitting the fenderliner.
2. Wheel Stud Length: Your vehicle's wheel studs need to be less than 3/4" (20mm). If not, the back of your wheels need pockets long/wide enough for your studs.
3. Fitment: Use the Applications list above. If your vehicle is not on the list, message us so we can help find you the correct item.
4. If your vehicle hub is smaller than 66.1mm, we recommend purchasing hubcentric rings to reduce the chance of vibrations.
5. If your vehicle does not have 12x1.25 threaded wheel studs, you would need to purchase the correct threaded lug nuts for proper installation.