2 in 1 USB C to 3.5mm Headphone Jack Adapter Hongwei

Additional Information
1.It is normal if there is condensation on the nozzle of the Fog Machine
2.A small amount of fog may spray during or after operation
3.The Fog Machine will have to reheat after long spray. It will stop operation for a short period in order to heat up to operating temperature again. While this is happening, fog cannot be produced. The Wired Control Indication Light will turn on again when the unit is ready to generate more fog
4.All fog machines are apt to clogging due to the consistency of Fog Liquid and the high temperatures at which it vaporizes
5.Keep away from the spray nozzle at least 0.5 meters when the nozzle spraying fog
6.The fog machine will become hot during use. After use, please wait for some minutes before trying to touch it by hand
7.This product is not a toy. Please keep this unit out of reach of children and pets
8.If you find there is low fog output after many hours of continuous operation or after the machine has been idle or in storage for a long time, it is advised to empty all Fog Liquid from the machine and clean the tank. Please unplug the machine from power socket before cleaning

Fuse Replacement
If the Fog Machine does not work at all when it is connected to the power socket, then it is probably that the fuse has been broken
WARNING: Risk of electric shock and fire. Disconnect from power socket before replacing the fuse
1.Turn the fuse knob counterclockwise to reveal the fuse
2.Replace the fuse with the same size and type fuse: 5A, 125V
3.Place fuse in cover and reinstall by turning clockwise. Be sure not to over tighten