(2 cbls) 1 Ft Solar Battery 2/0 Cable Flexible Parallel 1-Red 1-Black 3/8" Stud

This listing is for a quantity of 2 cables. 1 Foot Battery Cables with ring terminals and heatshrink. Red heatshrink on both ends of one cable and black heatshrink on both ends of the other cable for use as parallel battery cables. The lugs are 3/8 inch studs, non-insulated, closed end for corrosion resistance, tin plated ring terminals. 2/0 Gauge Heavy Duty solar cable. Ultra flexible & made with fine stranded 100% tinned copper wire. Dual wall insulation XLPE black color. UL 1232/1283/1346, 600V -40~+90 Celsius. Use for battery and Inverter inter connect. These cables are cut to order. Returns will not be accepted. Dual wall insulation XLPE Jacket with Electron beam cross-linked Compared with LLDPE, XLPE electrical characteristics reduce life-cycle operating losses. Shield losses due to circulating currents go down by approximately 2 percent, which brings energy costs down. XLPE also offers better mechanical characteristics. While typical wind installations of XLPE are direct buried, some applications require MV cable in duct. When used in a duct application, XLPE has a lower coefficient of friction for easier, faster pulling. XLPE s higher abrasion-resistance can also reduce potential cable damage during installation.