1pc 315MHZ Cloning Clone Copy Code RF Remote Control Duplicator Transmitter

Important Note: The remote control does not include battery because of the strict customs inspection. Please prepare a "27A 12V" battery for it. We appreciate your understanding and support.

Easy to install and use, the 4 channels remote control system lets you take control of your gadgets, car and home or garage. The Clone Remote can be work with the following remote control IC modules (please check your original remote control before ordering), and your remotes also should be Fixed code or Learning code, PT2262¡PT2264¡PT2260¡PT2240¡EV1527¡FP527¡FP1527¡SC2262¡SC2260¡LX2260 etc.
Don't copy the IC modules: HCS301,300, and rolling code

Methods of operation
1, Clear out code:
Press Lock key and unlock key at the same time.
2 seconds later, LED flashes 3 times, then followed by a continuous fast blinking.
It Indicates that the remote control code stored was deleted.
2 Duplicating (learning)
Left Hands handing the original remote control, right hand handling the duplicating remote control; 2 remote controls put together as close as possible,
press the lock buttons of the 2 remote controls at the same time; Led flash 3 times after 3 seconds, following a fast flashing. It indicates that the original control of the lock key code has been copied into the duplicating remote control.
The other 3 buttons are off the same operation.
3 Resume/Recovery code:
If you clear code of duplicating remote control incautiously, you can press start key and mute key at the same time, led light flash 3 times, then flash fast. It shows the code of duplicating remote control is resumed.