1byone Amplified Digital Indoor TV Antenna for HDTV, VHF / UHF / FM, Digital Freeview and Analog TV Signals, 28dB

Package Contents:

1. Antenna with attached 1.25 meters cable
2. AC / DC power adaptor

Set up Guide:

Step 1: Connect the end (F- male) of attached coaxial cable to the ANT / IN connector on the back of the HDTV.
Step 2: Connect the external adapter to the DC jack at the antenna back and plug it to the wall socket.
Step 3: In the TV's setup menu, set the tuner mode to "Antenna" or "Air". Refer to the TV manual for detailed instructions.
Step 4: In the TV's setup menu, set TV to "scan" for channels. This can sometimes be listed as auto-program, auto-scan, channel search or channel scan. Consult the TV manual for detailed instructions.
Step 5: If reception is sporadic, try moving the antenna to another location, extract the dipoles to maximum length and swivel the loop & dipole until optimal position is found by rescanning TV.
Step 6: Fix the antenna in that position.

Note:

1. Placing the antenna higher or close to a window may result in better reception. You must rescan whenever you move the antenna.
2. If you use a flat HDTV, pls go through your TV manual to make sure your TV is with built-in tuner for freeview.
3. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Pls read receiver manual.
4. You should retune your Freeview TVs and digital receiver from time to time to ensure you are receiving all available services. Retuning takes only a few minutes and can be done with your remote control.