1.4mm Oak Blind Cord Kit 30 Feet of Cord and Basic Video Instructions

Standard cord replacement kit components for blinds with 2 pull cords. 2 plastic cord tassels, 2 plastic cord stops, 2 plastic bottom rail plugs for 1/4" hole and 2 plastic bottom rail plugs for 5/16" hole. 1 threading tool. 30 Feet of 1.8mm oak pull cord. Warning, the cords on certain products present a potential strangulation hazard. Basic Repair Instructions Examine how cords are threaded through the cord guides and cord lock. Remove bottom rail plug and remove the worn out cord. Pull the new cord through the hole in the bottom of the head rail. Pull cord through the cord guides and into the cord lock. Stack the slats to together and push the cord threading tool in from the bottom rail. Slip the cord into the threading tool and pull. For longer blinds you may need to do this in small sections. Slip the cord into the bottom rail plug and tie a knot. Install and lower the blind. Install clear plastic cord stop about 2 inches below the cord lock. Pull the cord through the hole in the cord stop and knot the cord so the stop does not move. Cut the cord to desired length. Attach the end of cord to the tassel.