1/4" Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open (Air, Non-potable Water)

U.S. Solid normally open (N/O) electric solenoid valve is constructed with a durable brass body, one-quarter inch (1/4") female threaded (NPT) connections, and heat and nitrile rubber (NBR) seal. Suitable for use with hot or cold water, gas, air, oils, very low viscosity fluids (< 20 cst), etc.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Brand: U.S. Solid

Model: USS2-00081

Size: 1/2"

Flow Aperture: 1.6 mm

Body Material: Brass

Gasket / Diaphragm / Seal: NBR

Rated voltage: DC 12 V, ± 10%

Current: 1.083 A

Power rating: 13 W

Operation Type: Direct Lift Valve

Operation Mode: Normally Open

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 0.14 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 0.14 Cv

Minimum operational temperature: 23 degrees Fahrenheit (-5 degrees Celsius)

Maximum operational temperature: 176 degrees Fahrenheit (80 degrees Celsius)

Suitable Media: Air, water, oil, natural gas, etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.

Quality assurance: CE Certified

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.