1/2GAL Stripping Gel

Citristrip Safer Paint & Varnish Stripping Gel is a powerful, industrial-strength remover. It is easy to use because it stays wet and active for up to 24 hours, allowing stripping of multiple layers in one step. It contains no methylene chloride, is non-caustic and is safe for indoor use. This special orange stripper has a pleasant citrus scent and is biodegradable. Use Citristrips all-purpose stripping gel to remove multiple layers of latex and oil-based paint, varnish, lacquer, enamel, polyurethane, shellac, acrylics and epoxy from wood, metal and masonry surfaces.
Size: 1/2 Gallon Contains no methylene chloride Strips multiple layers Stays active up to 24 hours For both outdoor & indoor use Fresh orange scent Effective on wood, metal & masonry to remove most paints, shellacs, polyurethanes, lacquers, epoxies & varnish Thick enough to use on vertical surfaces Directions for Use: Protect hands with chemical-resistant gloves and eyes with chemical splash goggles. Shake well. Pour into a metal container and apply with a paint brush. After 30 minutes (up to 24 hours), scrape a small test area to see if finish is ready for removal. Gently scrape in direction of wood grain with a plastic stripping tool. For stubborn areas, use an abrasive stripping pad dipped into CITRISTRIP Paint & Varnish Stripper. A toothbrush, toothpick or stripping brush will help remove old finish buried in recesses. Use a paint stripper wash or Odorless Mineral Spirits with an abrasive stripping pad to loosen remaining residue. Surface should be completely clean and dry before refinishing. Helpful Tips: Test in an inconspicuous area before use on any plastic or synthetic surface as strippers can damage these surfaces. For best results, use in temperatures between 65 and 85F and away from strong breeze and hot sun. Protect surrounding areas with a heavy plastic drop cloth. Disposal: Allow liquid to evaporate and residue to dry