[ 3 in1 ] Hobbywing LCD Program Box Card USB Link for XERUN EZRUN Platinum ESC

Specifications:
2.1 Size: 90mm (L) * 51mm (W) * 17mm (H)
2.2 Weight: 65g
2.3 Input Voltage: 4.5-12.6V
(If the ESC hasn't a built-in BEC, you must use an additional battery pack to supply the program box)
2.4 Displayer: 16*2 characters LCD.
2.5 Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)
One single firmware compatible with all speed controllers, including XERUN series V2.0/2.1/3.0/3.1, EZRUN V2.0, Platinum seriesand PlatinumV3series.
Programmable Items:
This Multifunction LCD Program Box is suitable for the following ESC:
XERUN & EZRUN series Car ESC (Version 2.0 and 2.1)
XERUN-120A V3 & V3.1 ESC
PLATINUM series helicopter/aircraft ESC
PLATINUM V3 series helicopter/aircraft ESC
A) For the XERUN and EZRUN series car ESC:
Running Mode/Drag Brake Force/Low Voltage Cut-Off Threshold/Start Mode/Maximum Brake Force/Maximum Reverse Force/Initial Brake Force/Throttle Neutral Range/Timing/Over-Heat Protection/Motor Rotation/Lipo Cells Amount
*Note: Some speed controllers have less programmable items, but some have more. Please read the user manual of your speed controller to get detail information.
B) For the PLATINUM series airplane ESC:
/ Brake/Battery Type/Low Voltage Protection Mode (Cutoff Mode)/Low Voltage Protection Threshold (Cutoff Threshold)/Start Mode/Timing/Governor Mode/Reserved Item #1/ PWM Frequency/ Built-In BEC Output/Reserved Item #2/ Lipo Cells Amount
C) The programmable items for the PLATINUM V3 series airplane ESC:
Brake/Battery Type /Low Voltage Protection Mode (Cutoff Mode) /Low Voltage Protection Threshold (Cutoff Threshold) / Flight Mode / Autorotation Restart Time /Timing/ PWM Frequency/ Built-In BEC Output / Lipo Cells Amount